How to grow mushrooms at home, starting with a kit

Checked on November 11, 2026

SHORT ANSWER

Start with a ready-to-fruit kit. Keep the block moist, give it fresh air and some light, and pick before the caps flatten. North Spore says pins usually start 6 to 10 days after activating a Spray & Grow kit, with a full flush 4 to 5 days later.

Choose how you will grow

There are three common routes, and they ask for very different amounts of work.

  • A ready-to-fruit kit. The seller has already grown the mycelium through the block, so you only handle the fruiting stage. This is where nearly everyone should start.
  • Spawn and your own substrate. You mix spawn into a substrate you prepare yourself. North Spore says plainly that grain spawn is not an all-in-one kit and has to be mixed with bulk substrate first. See how to grow mushrooms without a kit.
  • Outdoor logs, straw and wood chip beds. Slower, and tied to the seasons. See growing mushrooms outdoors.

If you want a kit, the best mushroom grow kits for beginners page compares them. If you are weighing a monotub or tent with fans and a humidifier, read smart grow box vs traditional kit first.

Set up the kit

North Spore says to activate a Spray & Grow kit when it arrives. If you have to wait, keep it in a cool, dry place out of direct sun, or in the fridge for up to 6 months. Kits can start fruiting inside the bag after a few weeks of storage.

To open it, keep the block in its bag and box:

  1. Remove the front panel of the box along the perforations.
  2. Cut an X into the exposed plastic.
  3. Leave the flaps in place.

Shiitake is the exception among common kits, and its block comes out of the bag. See shiitake popcorning for that.

If mushrooms are already growing inside the bag when the kit arrives, that is normal. The bag has a filter, and the mycelium grows toward the air. North Spore says to break them off and compost them.

Give it water, air and light

North Spore boils the job down to three things: hydration, airflow and light.

  • Water. Spray 5 to 10 times per session. In a dry climate or with the AC running, build a humidity tent: a trash bag with half-inch holes over the kit, misted inside daily, and removed once pins form.
  • Air. Leggy, stringy mushrooms need more airflow.
  • Light. Use dappled natural light on a kitchen counter, not a cupboard or closet. Pale caps are a sign the kit needs more natural light.

Rootlab, an Australian kit seller, lists the same three causes when mushrooms fail to develop: low humidity, insufficient airflow or improper lighting.

North Spore's block booklet says most species fruit generally at 60 to 80°F, with exceptions, and that lower humidity by 5 to 10% once pins form. Our fruiting conditions cheat sheet lists the booklet's numbers species by species.

Watch for pins and know what is normal

Pins are the first tiny mushrooms. North Spore says pinning typically begins 6 to 10 days after activation, and a full flush follows in about 4 to 5 days. Once mushrooms are growing they can double in size in a day, so check the kit every morning.

Some things look alarming and are not. White fuzz is usually mycelium (see mycelium vs mold). Amber beads on the block are harmless mycelial exudate, according to North Spore.

Harvest at the right moment

For oyster mushrooms, harvest before the caps flatten or turn concave. For lion's mane, North Spore says the teeth should be a quarter to a half inch long, and you should pick before it yellows and turns mushy. The signs for each oyster type are in when to harvest oyster mushrooms.

Twist the mushrooms off at the base or cut them with a knife, and trim any sawdust before cooking. North Spore says to always cook homegrown mushrooms thoroughly, because raw chitin is hard to digest. Its instructions also say harvesting younger reduces spore load, and that people with allergies may want to grow outdoors or in a well-ventilated area.

Go for another flush

A flush is a wave of mushrooms forming at once. After the first, keep spraying daily. North Spore says new pins should show up in about 2 weeks, and its guide says 2 to 3 weeks.

If nothing happens, soak the block cut side down in cool water, about 20 minutes for most species and 5 to 10 minutes for lion's mane. Drain it cut side down for 10 minutes, pat it dry, return it to the bag with the cut side out, and spray 2 to 3 times a day. Later flushes are usually smaller than the first.

Fix problems early

Start with mushroom grow kit troubleshooting. If the kit has gnats, read mushroom pests. If you cannot tell whether a patch is mycelium or something worse, use the contamination identifier, and send the seller a photo.

Keep learning

When something looks wrong

Care and harvest

Other ways to grow

Background

Tools

Common questions

Do I need special equipment to grow mushrooms from a kit?

Not for a boxed Spray & Grow kit. North Spore says a spot with dappled natural light and gentle air movement, such as a kitchen counter, works well. Its larger 5 lb fruiting blocks work best in a fruiting chamber such as a monotub or Martha tent.

How long does a kit take to produce mushrooms?

North Spore says pins usually begin 6 to 10 days after you activate a Spray & Grow kit, and a full flush follows in about 4 to 5 days. These are the seller's figures, not our own test results.

How many harvests can I get from one kit?

North Spore guarantees the first flush and says up to five are possible, though later flushes are usually smaller. It says a first flush typically weighs between half a pound and 2 lb.

Is the white fuzz on my kit mold?

Most likely it is mycelium, the living body of the mushroom. North Spore says a healthy block has white or off-white mycelium through brown substrate and smells earthy. Black, green or orange patches, or a foul smell, are worth a photo to the seller before you open the kit.

Sources

  1. Spray & Grow Kit FAQ, North Spore. Checked November 11, 2026.
  2. Using a Spray & Grow Kit, North Spore. Checked November 11, 2026.
  3. Fruiting Block Kits FAQ, North Spore. Checked November 11, 2026.
  4. Grain Spawn FAQ, North Spore. Checked November 11, 2026.
  5. Fruiting Block Kit Instruction Booklet (PDF), North Spore. Checked November 11, 2026.
  6. Mushroom Growing Kit Problems, Tips And Tricks, Rootlab. Checked November 11, 2026.

How this page is checked

wrote this guide from North Spore's own kit instructions, FAQs and booklet, and each step above is one the seller states. We have not grown a kit for this page, so the timings are the seller's figures, not our results. North Spore is the main source because it publishes the most complete instructions, and other sellers' kits can differ. Rootlab, another kit seller, is cited once to cross-check the water, air and light advice. Check your kit's own instruction sheet first. The page is updated when the seller's guidance changes.